Pivot Risers

  • 45720 thur 45790 - PowerMadd Narrow Pivot Riser with Bolts and Clamps

    - Modern design that is both durable and light weight. 

    - All mounting hardware is included (4 caps and 8 bolts) making it a direct OEM replacement.  

    - Designed with cut outs on the top and bottom to allow wires to be routed through the inside of the riser. 

    - Designed to fit any snowmobile with a (3-3.5”) wide T-style steering post.

    - Extended throttle and brake lines may be required with taller risers. See our riser fitment chart for details.

    - Machined from T-6061 aluminum

    - Works with 7/8" bars. For 1 1/8" bars, you will also need 44257

    - Anodized for corrosion resistance

    - Laser etched logos


    Click Here -  Snowmobile Fitment Chart.


    Click Here - Installation Instructions

    0.0
    Add first review
    Not rated yet
    • $70.00
    • $140.00
    Sorry, we only have 20 of that item available
  • 45820 thru 45890 - PowerMadd Wide Pivot Riser with Bolts and Clamps

    - Modern design that is both durable and light weight. 

    - All mounting hardware is included (4 caps and 8 bolts) making it a direct OEM replacement.  

    - Designed with cut outs on the top and bottom to allow wires to be routed through the inside of the riser. 

    - Designed to fit any snowmobile with a (3-3.5”) wide T-style steering post.

    - Extended throttle and brake lines may be required with taller risers. See our riser fitment chart for details.

    - Machined from T-6061 aluminum

    - Works with 7/8" bars. For 1 1/8" bars, you will also need 44257

    - Anodized for corrosion resistance

    - Laser etched logos


    Click Here -  Snowmobile Fitment Chart.


    Click Here - Installation Instructions   

    0.0
    Add first review
    Not rated yet
    • $70.00
    • $140.00
    Sorry, we only have 11 of that item available
  • 45527 thru 45541 - Pivot Riser Blocks

    - PowerMadd Pivot Style Riser Blocks are designed to be used as replacements for stock pivoting risers.
    - Can be used in conjunction with a PowerMadd Pivot Adaptor for snowmobiles with a flat top steering posts.  
    - If your sled has a "T" post and a pivoting style stock riser you can easily raise your bars by replacing the stock riser with a longer PowerMadd pivot riser. 
    - The PowerMadd Pivot Style Riser is tapped so that is works with your stock handlebar clamps and existing bolts. 

    Note - Yamaha snowmobiles require a PowerMadd Yamaha Pivot Adaptor - 45583


    To verify snowmobile fitment click here for our Snowmobile Fitment Chart.

    0.0
    Add first review
    Not rated yet
    • $45.00
    • $65.00
    Sorry, we only have 2 of that item available
  • 44257 - Oversized Bar Clamp (1 1/8)

    - Universal adaptor allows 1 1/8" bars to be clamped to ATV's, motorcycles and snowmobiles with PowerMadd Pivot Riser Blocks. 
    - Fits ATVs, motorcycles, snowmobiles and riser blocks with front to back spacing between 1.197" and 1.38" center to center. 
    - Will raise bars 1/4" when existing application does not have a bottom clamp. 
    - Will raise bars 3/4" when used with pivot risers or steering posts with built in bottom clamp.

    To verify snowmobile fitment click here for our Snowmobile Fitment Chart.


    Click Here - Installation Instructions

    0.0
    Add first review
    Not rated yet
    • $70.00
    Sorry, we only have 43 of that item available

Bestsellers

Footer navigation